ABB 81EU01F-E GJR2391500R1210 Procontrol P14 Universial Input Module

Product Details:

Description:

The ABB 81EU01F-E GJR2391500R1210 is part of ABB Procontrol P14 control module. It is consists of 16 function units. Each function unit may be used for any type of input mode. Any combination is possible. Parameter allocation and setting is programmed easily via the configuration list. The programmed values are stored in an EEPROM to ensure that they are not lost in the event of power failure. They can be changed any time. The module can be plugged into any station of the PROCONTROL bus system.It incorporates a standard interface for the PROCONTROL station bus.The module address is set automatically when the module is plugged into the PROCONTROL station.The telegrams received over the bus are checked by the module for error-free transmission based on their parity bits.

The ABB 81EU01F-E GJR2391500R1210 module transmits the input signals and/or converted input signals in telegrams via the station bus to the PROCONTROL bus system. Before transmission the telegrams are checked and provided with parity bits. This ensures that the receiving module can check for fault-free transmission. The module checks the telegrams received over the station bus, e.g. those intended for corrective calculations, by their parity bits for fault-free transmission.

ABB PROCONTROL P is a digital process control system designed for power plants. It was introduced in 1982 and is known for its reliability and functionality. It can be used for a variety of applications, from small local control systems to large generation units. It can be integrated with existing systems, making it suitable for retrofitting and refurbishing existing plants. It offers a wide range of features for boiler protection, turbine control, engineering, and diagnostics.

The ABB 81EU01F-E GJR2391500R1210 module is up to four limit values can be allocated to each analog signal. Up to four independent correction and filter calculations can be performed independently on each input module. Programming is done by function block structuring. Observe the boundary conditions for this application. The module is intended to be used with the Process Operator Station (POS30).The module uses 2process interfaces for the power controllers and for the process.

Datasheet Link:

ABB 81EU01F-E GJR2391500R1210.pdf

Joyoung International Trading Co.,Ltd is not only the world's leading industrial equipment supplier, but also has been committed to the production of automation control system modules and spare parts for ten years.

We are located in Xiamen, a famous tourist city in China.

We are the world's leading industrial equipment supplier, specializing in the production of automation control system modules and spare parts for several years. We purchase from factories of world famous brands, such as konnad (general agent in China), Bently Nevada, abb, Invensys Triconex, GE Fanuc, Foxboro, Emerson, Epro, Schneider Modicon, Westinghouse, Siemens, Woodward, hima, Yaskawa, Bosch Rexroth, Rosemount, etc.

All of kinds of DCS、PLC parts as below:

ABB:

AC800M series module,Industrial robots spare parts DSQC series ,Bailey INFI 90,800xA,Advant OCS with Master Software,with MOD 300 software Advant OCS,Freelance - Distributed Control System for Process Industry,Symphony Melody,Satt OCS,Symphony DCI System Six,Harmony/INFI 90,Security system

Rockwell Allen-Bradley:

SLC500: 1747/1746 series

MicroLogix: 1761/1763/1762/1766/1764 series

CompactLogix: 1769/1768 series

Logix5000: 1756/1789/1794/1760/1788 series

PLC-5: 1771/1785 series

Bently Nevada:

3500/3300 Surveillance protection syste,Proximitor eddy current sensor probe

EPRO:

PR6422/PR6423/PR6424/PR6426 eddy-current transducer,PR9268 series Electro dynamic absolute vibration sensor MMS6000 system

VIBRO-METER:

Vibrating sensor,Acceleration sensor ,Eddy-current transducer,Monitor system module,Gateway communication module

Schneider Modicon:

Quantum 140 series:CPU processor module,Communication module,Analog input output module,Digital input output module

GE:

IC693/IC695/IC697/IC698/IC200/IC660/IC670 CPU module ,Communication module ,Analog digital module

EX2100,EX2000Excitation system card ,IS200 series DS200 series

Invensys Triconex:

Redundant fault-tolerant control system,the most modern fault-tolerant controller based on triple-module redundancy (TMR) architecture

Westinghouse:

OVATION system,WDPF system,WEStation system

Honeywell:

Alcont,Experion LS,Experion PKS,Experion HS,Plant Scape

TDC 2000,TDC3000,TPS,security system

Emerson:

DeltaV system Dual - channel redundant security system Redundant controller

Power supply module I/O unit Analog AI modules Analog AO module

Siemens:

Siemens MOORE, 6ES5 series,6GK series,6DD series,6AR series

Yokogawa:

CS3000 system CPU control module,Analog module

Yaskawa:

Robots spare parts,Servo controller, Servo motor, Servo drive

Motorola (MVM):

MVME 162, MVME 167, MVME 1772, MVME 177 and other series

XYCOM:

I / O VME boards and processors.

Bosch Rexroth:

Indramat, I / O modules, PLC controllers, Drive modules, and so on.

Rosemount:

Pressure Transmitter, Flow meter

KONRAD:

EC6423/EC6424/EC6426/EC6430/EC6432/EC6433 series eddy-current transducer

EC20382 displacement sensor,MMS7000 Surveillance protection system

ENTEK:

Eddy-current transducer probe，Vibration monitoring table double channel axis vibration monitoring table C6652

Invensys Foxboro:

I/A Series system,FBM(input / output modules) sequential control,Ladder logic control, Accident recall processing,Digital-to-analog conversion,Input / output signal processing,Data communication and processing

Woodward:

SPC valve position controller 505/505E(9907-162,9907-164,9907-165,9907-167)digital controller

2301A controller 9905 series 2301D-ST series